Safety Precautions - Chauvin Arnoux PAC 21 Manual De Instrucciones

English
Thank you for purchasing a Clampon current transformer.
To obtain the best service from this instrument,
I read the instruction manual carefully and
I respect all necessary precautions that are required in the use of this instrument.
WARNING, risk of DANGER! The operator must refer to these instructions whenever
this danger symbol appears.
Application or withdrawal authorized on conductors containing dangerous voltages.
Type A current sensor as per IEC 61010 2 032.
Equipment protected throughout by double or reinforced insulation.
The CE marking indicates conformity with European directives, in particular LVD
and EMC.
The rubbish bin with a line through it indicates that, in the European Union, the
product must undergo selective disposal in compliance with Directive WEEE 2002/
96/EC. This equipment must not be treated as household waste.
I Only use the PAC 21 clamp indoors.
I Do not expose the clamp to running water.
I Do not use the PAC 21 clamp on conductors at a voltage of more than 600 V in relation
to the earth.
I For measurements on DC current, check zero output. Adjust if necessary (see " Operating
procedure").
I During measurement, ensure that the conductor is in line with the markings on the jaws
and that the clamp closes correctly.
I Your clamp is supplied with a set of adhesive labels. Choose the label for your and stick
it to the back of the case.
Except as otherwise stated, our warranty is valid for twelve months starting from the date
on which the equipment was sold. Extract from our General Conditions of Sale provided
on request.

SAFETY PRECAUTIONS

WARRANTY
13