Wall Mounting - Pur Line PANEL S Serie Manual De Usuario

INSTALLATION
The appliance must only be used and installed in a fixed position.
The installation must be carried out by a qualified electrician to avoid any danger.
- IMPORTANT! Make sure that there is no electrical wiring or other installation
(water pipe for example) near the locations where the holes will be drilled. Be
sure to fix the unit vertically and firmly to the wall.
- This appliance is intended for indoor installation and use only.
- The appliance should not be placed directly below a power outlet.
- Respect the minimum distances between the appliance and the walls, the
floor, furniture, curtains, etc.
Model
PANEL S1000
PANEL S1500
PANEL S2000

WALL MOUNTING

1. Be sure to keep the distance between the heater and floor, wall at least 30cm.
2. Use drill dimension paper to drill top two holes(Φ8) on the wall and put the expansion screws in the holes.
Dimensions
54x8x40cm
70x8x40cm
86x8x40cm
30cm
EN
30cm
30cm
14
Dimensions (with feet)
54x22x43.6cm
70x22x43.6cm
86x22x43.6cm
30cm