Technical Data - Raider RDI-PC05 Manual Del Usuario

EN
Original instructions for use
Dear Customer,
Congratulations on the purchase of machinery from the fastest growing brand of electric,
gasoline and pneumatic tools - RAIDER. When properly installed and operating, RAIDER
are safe and reliable machines and work with them will deliver a real pleasure. For your
convenience has been built and excellent service network of 45 service stations across the
country.
Before using this machine, please carefully acquainted with these "instructions' manual".
In the interest of your safety and to ensure proper use and read these instructions carefully,
including the recommendations and warnings in them. To avoid unnecessary errors and
accidents, it is important that these instructions will remain available for future reference
to all who will use the machine. If you sell it to a new owner "Instructions' manual" must
be submitted along with it to enable new users to become familiar with relevant safety and
operating instructions.
Euromaster Import Export Ltd. is an authorized representative of the manufacturer and
owner of the trademark RAIDER.
Address: Sofia City 1231, Bulgaria "Lomsko shausse" Blvd. 246, tel +359 700 44 155, 934 10
10, www.raider.bg; www.euromasterbg.com; e-mail: info@euromasterbg.com.
Since 2006 the company introduced the system of quality management ISO 9001:2008
with scope of certification: Trade, import, export and servicing of hobby and professional
electrical, mechanical and pneumatic tools and general hardware. The certificate was issued
by Moody International Certification Ltd, England.

Technical Data

parameter
Model
Rated voltage
Frequency
Rated power input
No-load speed
Cutting disc diameter
Sound pressure level LpA Uncertainty K=3
Sound power level LwA Uncertainty K=3
Vibrations a Uncertainty K=1.5
h
Protection class
The numbering of the components shown refers to the representation of the power tool on
the graphic pages.
1. On/off switch.
2. Protective barrier for trigger switch (prevents accidental switching).
3. Rear grip.
4. Speed control.
5. Front grip.
6. Spindle lock.
7. Polishing / sanding disk.
unit value
-
RDI-PC05
V
Hz
W 1300
min 800-3500
-1
mm
dB(А)
dB(А)
m/s
2
-
9
230
50
180
86
97
5.95
II