Ubiquiti Networks airMAX BulletAC-IP67 Manual Del Usuario página 13

Installer Compliance Responsibility
Devices must be professionally installed and it is the
professional installer's responsibility to make sure the device is
operated within local country regulatory requirements.
Antenna
Select your antenna from the list. If Calculate EIRP Limit is enabled, transmit
output power is automatically adjusted to comply with the regulations of
the applicable country. For a Custom antenna, Antenna Gain is entered
manually. Note the requirements and antenna types listed below.
Cable Loss (When applicable)
Enter the cable loss in dB. Output power is adjusted to compensate for loss
between the radio and the antenna.
This radio transmitter FCC ID: SWX-BDBAC has been approved by FCC
to operate with the antenna types listed below with the maximum
permissible gain for each antenna type indicated. Antenna types not
included in this list or having a gain greater than the maximum gain
indicated for that type, are strictly prohibited for use with this device.
Certified Antenna Types
Antenna
Omni
Sector
Dish
Frequency
2.4 GHz
5 GHz
2.4 GHz
5 GHz
2.4 GHz
5 GHz
Gain
13 dBi
13 dBi
17 dBi
22 dBi
24 dBi
34 dBi