Tabla de contenido
Publicidad
Installation Requirements
• Shielded Category 5 (or above) cabling with drain wire
should be used for all outdoor wired Ethernet connections
and should be grounded through the AC ground of the PoE.
We recommend that you protect your networks from
harmful outdoor environments and destructive ESD events
with industrial-grade, shielded Ethernet cable from Ubiquiti
Networks. For more details, visit
www.ubnt.com/toughcable
• Surge protection should be used for all outdoor installations.
We recommend that you use two Ethernet Surge Protectors,
model ETH-SP, one near the Bullet and the other at the entry
point to the building. The ETH-SP will absorb power surges
and safely discharge them into the ground.
ETH-SP
To Antenna
BulletAC-IP67
ETH-SP
ES-8-150W
To LAN
Publicidad
Tabla de contenido
