DeWalt DW875 Manual De Instrucciones página 24

E N G L I S H
• Make sure the disc rotates in the direction of the
arrows on the accessory and the tool.
• Secure the workpiece.
Switching ON and OFF (fig. A)
The ON/OFF-switch (1) of your Chopsaw is mounted
in the control handle (2).
• To run the tool, press the ON/OFF-switch.
• Keep the ON/OFF switch depressed while pulling
down the control handle (2) to cut the workpiece.
• To stop the tool, release the ON/OFF-switch. The
tool will automatically travel to its rest position.
Do not switch the tool ON or OFF when
under load.
Consult your dealer for further information on the
appropriate accessories.
Transport (fig. A)
Your D WALT Power Tool is equipped with a chain
E
(8) which locks the tool in closed-down position for
carrying.
• Lower the guard (4) onto the cutting table (9) and
secure the Power Tool in this position by hooking
the chain link over the pin.
• Transport the Power Tool using the carrying
handle (3).
• To release the tool, press the guard (4) down onto
the cutting table (9) and release the chain (8).
Maintenance
Your D WALT Power Tool has been designed to
E
operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
Lubrication
Your Power Tool requires no additional lubrication.
Cleaning
Keep the ventilation slots clear and regularly clean
the housing with a soft cloth.
en - 5
Unwanted tools and the environment
Take your tool to an authorized D
agent where it will be disposed of in an
environmentally safe way.
GUARANTEE
• 30 DAY NO RISK SATISFACTION GUARANTEE •
If you are not completely satisfied with the
performance of your D
it within 30 days, complete as purchased, to a
participating Dealer, or an authorized D
repair agent, for a full refund or exchange. Proof
of purchase must be produced.
• ONE YEAR FREE SERVICE CONTRACT •
If you need maintenance or service for your
D WALT tool, in the 12 months following
E
purchase, it will be undertaken free of charge at
an authorized D WALT repair agent. Proof of
E
purchase must be produced. Includes labour and
spare parts for Power Tools. Excludes
accessories.
• ONE YEAR FULL WARRANTY •
If your D WALT product becomes defective due
E
to faulty materials or workmanship within 12
months from the date of purchase, we guarantee
to replace all defective parts free of charge or, at
our discretion, replace the unit free of charge
provided that:
• The product has not been misused.
• Repairs have not been attempted by
unauthorized persons.
• Proof of purchase date is produced.
• This guarantee is offered as an extra benefit
and is additional to consumers statutory rights.
For the location of your nearest authorized
D WALT repair agent, please use the appropriate
E
telephone number on the back of this manual.
WALT repair
E
WALT tool, simply return
E
WALT
E
16