Setting The Decoder; Editing The Channel Overview - JVC CO-46LCD-BD Manual De Usario

Setting the decoder

Editing the channel overview

It is described below how you can change the sequence of stored TV channels or delete them from the channel overview.
ENGLISH
You can use the SCART1 or SCART2 input to connect
a decoder for coded TV channels (pay TV).
S Select <Decoder> [ ] / [
Y B
You have the following selection options:
Decoder Decoder
Sound
Off Uncoded
Decoder A SCART1 Uncoded
Decoder B SCART1 Coded
Decoder A SCART2 Uncoded
Decoder B SCART2 Coded
S Press the [MENU] button to open the main menu.
S With the button [ ] or [ ] select the <Setup> menu.
A "
S Select <Tuner> with the button [
the button [ ].
"
S Select the menu option <Edit station list> [
and press the button [ ].
"
The menu <Editing the channel overview> appears on
screen.
S
With the buttons [ ] select the channel that
YBA"
is to be shifted.
S
Press the yellow button (mark). The channel is
marked yellow.
S
With the blue button (sorting mode) you can
change over between swap and insert.
Sorting mode Swap
S
Select a channel with which you would like to
swap the marked channel.
Use the buttons [ ] to do this.
YBA"
S
Press the yellow button (swap) to execute the
procedure.
Sorting mode Insert
S
Press the blue button (sorting mode) to execute
the sorting mode Insert.
S
Select a channel in the position of which you
would like to insert the marked channel. Use the
buttons [ ] to do this.
YBA"
S
Press the yellow button (Insert) to execute the
procedure.
Deleting a channel
S
With the buttons [ ] select the channel that
YBA"
is to be deleted.
S
Press the green button (Delete) to delete the se-
lected channel from the channel overview.
S To close the menu, press the red button.
].
TV channel
Picture
Uncoded
Coded
Coded
Coded
Coded
] or [ ] and press
Y B
] / [ ]
Y B
17