English; General Instructions; Safety Instructions; Use And Intended Purpose - Denios 158052W Manual De Instrucciones

English

General Instructions

No modifications or alterations can be made to the product without authorisation from the manufacturer, in the
event of this, the guarantee will be invalidated.
National standards and safety regulations must be observed.

Safety instructions

Before the product is used, it is to be checked for correct functioning. Should any defects appear, it must not be
used!
The German regulations BGV D8 (hoisting, lifting and winching equipment and BGV D27 (industrial
trucks) are to be observed!
Only use for the intended purpose!
The load must not be left in raised position.
The drums must only be raised slightly for when being transported.
The bearing capacity given must not be exceeded!

Use and intended purpose

The hydraulic drum pallet truck is a device for transporting 200 litre steel drums.
The operational temperature range is from -10°C to 40°C.

Assembly

Mounting steering unit and pump unit
•
Release the adjusting screw (140H) on the offset connecting link (139H).
•
Release three screws (H109) and three spring washers (H110) from the base
(103).
•
Attach the tow handle (H101) on the mounting position (103).
Please note: Take the rod and chain (H107) through the middle of the base
(103) and shaft (109)
•
Put the three screws (H109) with spring washers (H110) back on the base
(103) and tighten them.
•
Lift up the offset connecting link (139H) and hook the pin to the chain (H107)
in the hollow of the connecting link (139H).
Fasshubwagen
158052
Seite 7 von 15 Seiten
139H
140H
Ausgabe 05/2010