To Ensure Safe And Correct Use - Sharp AN-65ST1 Manual De Manejo

To Ensure Safe and Correct Use

This operation manual and the product use various displays and labels to ensure safe use.
Ignoring these displays and labels and incorrectly using the product could have results as classifi ed below. Please
read the following warning symbol information before reading the rest of this section, and be sure to strictly observe
all instructions.
Warning
Caution
Meaning of symbol
Do not put the unit in an unstable location.
● Do not put the table stand on a wobbly table or
in other unstable locations. The stand may fall
down or fall over, causing injury.
Do not do anything that could damage the power cord.
● Do not put heavy objects on the LCD color
TV power cord. Ensure that the cord is not
trapped under the table stand. Doing so may
damage the cord and cause a fi re or electric
shock. Avoid covering the cord with a rug or
similar object, as you or someone else may
inadvertently place something heavy on it
without realizing.
Do not use a damaged power cord.
● If the LCD color TV power cord is damaged
(e.g. if wires are exposed or broken) ask the
dealer for a replacement. Continuing to use
a damaged power cord may cause a fi re or
electric shock.
● Do not damage, alter, bind up, forcibly bend,
twist, pull, or heat the LCD color TV power
cord. Doing so may damage the cord and
cause a fi re or electric shock.
E-1
Not following these instructions could result in death or serious injury.
Not following these instructions could result in injury or property damage.
The symbol indicates something that care should be taken with.
The symbol indicates something that should not be done.
The symbol indicates something that must be done.
Warning
Always disconnect all cables before moving the table stand.
● Before moving the table stand, turn the LCD
color TV off, and ensure that the power cord
has been unplugged from the power socket and
that antenna cords, cords connecting the TV to
other devices, and fall prevention brackets have
all been removed. Failure to do so may damage
the cord and cause a fi re or electric shock.
Installation
● When assembling and installing the table stand,
follow the instructions in this operation manual
correctly. Failure to do so may cause the table
stand to fall down or fall over, resulting in injury
or damage.
Do not disassemble or modify the table stand.
● Do not disassemble or modify the table stand
any more than necessary. Doing so may cause
the table stand to fall down or fall over, resulting
in injury.
Caution