Kingfisher HLXF10A3T41T Manual Del Usuario página 16

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 105
OPEN WINDOW
This function switches automatically to frost protection mode when an open
window is detected and returns to the initial mode when the window is
closed.
- Press MENU to display Πod, then press + to access
the Und menu.
- Press OK-boost to enter this menu.
- Press + or – to permanently activate the function
(Aut), or to activate it once (ΠAn) or to deactivate
it (OFF).
- Press OK-boost to validate.
The manual position (ΠAn) puts the heater into frost protection mode for
one hour. During this hour, the initial settings can be re-established by
pressing MENU.
The
icon flashes when it detects an open window.
Important to note :
- The sensor in the heater detects whether a window is open or closed
by measuring abnormal temperature variations. Detection is carried out
several minutes after the window is opened or closed.
- Detection may be ineffective if these temperature variations are insuffi-
cient or untimely. This is the case where:
- The difference between the indoor and outdoor temperature is insufficient.
- The heater is too far from the window.
- The temperature gradient in the room does not allow for significant tem-
perature variations in the heater sensor.
- The ambient temperature is not stabilised at least one hour before the
window is opened.
- The temperature setting or mode were modified manually or by a pro-
gramme before or during detection.
DISPLAY OF REFERENCES
This menu displays the equipment and software
references (these references differ according to the
model).
- Press MENU to display Πod, then press + to access the references; the ref-
erence for the equipment and the reference for the software are displayed
alternately.
- Press MENU to exit the menu.
16
Quick start

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido