Kingfisher HLXF10A3T41T Manual Del Usuario página 9

SETTING THE ECO MODE TEMPERATURE
The Comfort and ECO setpoint temperatures are
set separately.
The ECO mode temperature range is between
13°C and 29.5°C and can be adjusted in incre-
ments of 0.5°C. If limited, increase the Comfort
temperature, as the ECO temperature is always
lower than the Comfort temperature.
- When Eco mode is in operation, press the + or - button to increase or
reduce the setpoint temperature ; the temperature flashes.
- Press the MENU button to cancel the setting, or the OK-boost button to
validate the ECO temperature selected.
SETTING THE BOOST
The temperature setting is automatically forced to 30°C during boost.
When Boost finishes, the thermostat returns to the mode and temperature
that was previously set.
- Press and hold for 3 seconds on the OK-boost
button to switch Boost on or off.
- Press the + or - button to select the Boost time:
5, 10, 15, 20, 30, 45, 60, 90 or 120 minutes (the
default selection is 60 minutes), then press the
OK-boost button to validate the selection; the re-
maining time in Boost is displayed.
- Press the MENU button to stop the Boost.
In Programme mode, Boost can be stopped at any time by pressing and
holding for 3 seconds on the OK-boost. Following a manual stop in Pro-
gramme mode, Boost can only be reactivated by a programme after a
period of 2 hours.
9
Quick start