Ec Declaration Of Conformity; General Safety Rules - DeWalt DW052 Manual De Instrucciones

EC-Declaration of conformity
DW052, DW053, DW054, DW055, DW056, DW057
D WALT declares that these tools and chargers
E
have been designed in compliance with:
98/37/EC, 89/336/EEC, 73/23/EEC, EN 60745-1,
EN 60745-2-2, EN 60335, EN 55014-2,
EN 55014-1, EN 61000-3-2 and EN 61000-3-3.
For more information, please contact D
address below, or refer to the back of the manual.
L (sound pressure) dB(A)
pA
L (acoustic power) dB(A)
WA
Weighted RMS acceleration value m/s
Sound pressure uncertainty (K ) dB(A)
pA
Acoustic power uncertainty (K ) dB(A)
WA
L (sound pressure) dB(A)
pA
L (acoustic power) dB(A)
WA
Weighted RMS acceleration value m/s
Sound pressure uncertainty (K ) dB(A)
pA
Acoustic power uncertainty (K ) dB(A)
WA
L (sound pressure) dB(A)
pA
L (acoustic power) dB(A)
WA
Weighted RMS acceleration value m/s
Sound pressure uncertainty (K ) dB(A)
pA
Acoustic power uncertainty (K ) dB(A)
WA
Director Engineering and Product Development
Horst Grossmann
D WALT, Richard-Klinger-Strase 11D-65510,
E
Idstein, Germany
11/2006

General Safety Rules

WALT at the
E
1) WORK AREA SAFETY
a) Keep work area clean and well lit.
DW052 DW053
b) Do not operate power tools in explosive
80 93
91 104
2 5.26 6.09
3 3
c) Keep children and bystanders away
3 3
2) ELECTRICAL SAFETY
DW054 DW055
a) Power tool plugs must match the outlet.
93 93
104 104
2 10.6 4.1
3 3
b) Avoid body contact with earthed or
3 3
DW056 DW057
95 97
c) Do not expose power tools to rain or wet
106 108
2 11.5 8.2
d) Do not abuse the cord. Never use the
3 3
3 3
e) When operating a power tool outdoors,
WARNING! Read all instructions. Failure
to follow all instructions listed below
may result in electric shock, fire and/or
serious injury. The term "power tool" in
all of the warnings listed below refers
to your mains-operated (corded) power
tool or battery-operated (cordless)
power tool.
SAVE THESE INSTRUCTIONS
Cluttered or dark areas invite accidents.
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust
or fumes.
while operating a power tool. Distractions
can cause you to lose control.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of
electric shock.
grounded surfaces such as pipes,
radiators, ranges and refrigerators. There
is an increased risk of electric shock if your
body is earthed or grounded.
conditions. Water entering a power tool will
increase the risk of electric shock.
cord for carrying, pulling or unplugging
the power tool. Keep cord away from
heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the
risk of electric shock.
use an extension cord suitable for
outdoor use. Use of a cord suitable for
outdoor use reduces the risk of electric
shock.
EN GL IS H
23