Ec Declaration Of Conformity; Defi Nitions: Safety Guidelines; General Power Tool Safety Warnings - DeWalt DCN690 Traducido De Las Instrucciones Originales

Identify additional safety measures to
protect the operator from the effects of
vibration such as: maintain the tool and
the accessories, keep the hands warm,
organisation of work patterns.
Battery pack DCB180
Battery type Li-Ion
Voltage V 18
DC
Capacity Ah 3.0
Weight kg 0.64
Battery pack DCB183
Battery type Li-Ion
Voltage V 18
DC
Capacity Ah 2.0
Weight kg 0.4
Charger
Mains voltage V
AC
Battery type
Approximate min 25
charging time (1.3 Ah) (1.5 Ah) (2.0 Ah)
of battery packs 55
(3.0 Ah) (4.0 Ah) (5.0 Ah)
Weight kg
Fuses
Europe 230 V tools
U.K. & Ireland 230 V tools
Defi nitions: Safety Guidelines
The definitions below describe the level of severity
for each signal word. Please read the manual and
pay attention to these symbols.
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially
hazardous situation which, if not
avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not
related to personal injury which, if
not avoided, may result in property
damage.
DCB181 DCB182
EC-Declaration of Conformity
Li-Ion Li-Ion
MACHINERY DIRECTIVE
18 18
1.5 4.0
0.35 0.61
CORDLESS FRAMING NAILER
DCB184 DCB185
DCN690, DCN691, DCN692
Li-Ion Li-Ion
D WALT declares that these products described
E
18 18
under Technical Data are in compliance with:
2006/42/EC, EN 60745-1, EN 60745-2-16.
5.0 1.3
0.62 0.31
These products also comply with Directive
2004/108/EC and 2011/65/EU. For more
information, please contact D
DCB105
address or refer to the back of the manual.
230 V
The undersigned is responsible for compilation of the
Li-Ion
technical file and makes this declaration on behalf of
D WALT.
30 40
E
70 90
0.49
Horst Grossmann
Vice President Engineering
10 Amperes, mains D WALT, Richard-Klinger-Strasse 11,
E
D-65510, Idstein, Germany
3 Amperes, in plugs
31.01.2014

General Power Tool Safety Warnings

The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1) WORK AREA SAFETY
a)
Denotes risk of electric shock.
Denotes risk of fire.
WALT at the following
E
WARNING: To reduce the risk of injury,
read the instruction manual.
WARNING! Read all safety warnings
and all instructions. Failure to follow
the warnings and instructions may result
in electric shock, fire and/or serious
injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
EN GL IS H
47