Ec Declaration Of Conformity; Defi Nitions: Safety Guidelines; General Power Tool Safety Warnings - DeWalt DCN692 Traducido De Las Instrucciones Originales

DCB180
Battery pack
Battery type Li-Ion
Voltage V 18
DC
Capacity A 3,0
h
Weight kg 0,64
Battery pack DCB183
Battery type Li-Ion
Voltage V 18
DC
Capacity A 2,0
h
Weight kg 0,40
Charger
Mains voltage V
AC
Battery type 10.8, 14.4, 18 Li-Ion
Approx. charging min 25
time of battery
(1.3 Ah)
packs
55
(3.0 Ah)
Weight kg
Fuses:
Europe 230 V tools
U.K. & Ireland 230 V tools
Defi nitions: Safety Guidelines
The definitions below describe the level of severity
for each signal word. Please read the manual and
pay attention to these symbols.
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially
hazardous situation which, if not
avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not
related to personal injury which, if
not avoided, may result in property
damage.
Denotes risk of electric shock.
Denotes risk of fire.
EC-Declaration of Conformity
DCB181 DCB182
MACHINERY DIRECTIVE
Li-Ion Li-Ion
18 18
1,5 4,0
0,35 0,61 CORDLESS FRAMING NAILER
DCN692, DCN695
DCB184 DCB185
D WALT declares that these products described
E
under Technical Data are in compliance with:
Li-Ion Li-Ion
2006/42/EC, EN 60745-1, EN 60745-2-16.
18 18
These products also comply with Directive
5,0 1,3
2004/108/EC and 2011/65/EU. For more
information, please contact D
0,62 0,35
address or refer to the back of the manual.
The undersigned is responsible for compilation of
DCB105
the technical file and makes this declaration on
230
behalf of D
30 40
(1.5 Ah) (2.0 Ah)
70 90
(4.0 Ah) (5.0 Ah)
Horst Grossmann
0.49
Vice President Engineering
D WALT, Richard-Klinger-Strasse 11,
E
D-65510, Idstein, Germany
10 Amperes, mains
02.02.2015
3 Amperes, in plugs

General Power Tool Safety Warnings

The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1) WORK AREA SAFETY
a)
b)
WALT at the following
E
WALT.
E
WARNING: To reduce the risk of injury,
read the instruction manual.
WARNING! Read all safety warnings
and all instructions. Failure to follow
the warnings and instructions may result
in electric shock, fire and/or serious
injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust
or fumes.
ENGLISH
49