Power On / Power Off - BeeWi BBA100 Manual Del Usuario

6
In the case your car radio provides
one of both ports with an extension
cable (in glove box or anywhere in
the passenger compartment), it is
advised to use additional extension
USB and/or audio cables to relocate
the adapter closer to the car radio with
the microphone towards the user.

2.2. Power On / Power Off

The unit will automatically power on when power is available from the
car radio USB connector. If you wish to power it on and off manually,
follow the instructions below:
- Power On: Press and hold MFB for 2 seconds until the blue indicator
starts blinking.
- Power Off: Press and hold MFB for 6 seconds until the red LED
indicator lights on and off.
2.3. Pairing
You can pair up to 7 devices to the BBA100 Car Radio Adapter. To
pair the unit with a mobile device, follow the instructions below:
- Refer to the Bluetooth pairing procedures in corresponding mobile
phone or music player user manual.
- Make sure the BBA100 is powered off, then long press MFB for
6 seconds when device is off until the blue and red indicators blink
alternatively and release the button. The unit is in pairing mode.
- Select the device name "BeeWi BBA100" on the screen of the phone
and enter the pass key "0000" if requested to add this device into your
phone device list.
- Confirm the connection on the phone to connect the "BeeWi
BBA100".
- Check the connection by placing a call or playing the music from
your phone.
- To pair another device, turn off the Adapter and repeat the procedure
above.
ENGLISH