cam SMARTY S332 Manual De Instrucciones página 16

IMPORTANT INFORMATION
1) Read carefully these instructions and retain
them for future reference.
2) Cam il mondo del bambino reserves all the
rights to amend the product for technical or
commercial reasons.
3) Always use the product as it has been con-
ceived; on the contrary the producer will not
be held responsible for any misuse. Do not
use if components or fi ttings are worn, dam-
aged or missing. In this case, do not use re-
placement parts other than those recom-
mended or supplied by the manufacturer.
4) Use this product only on a chair with larger
dimensions than those of the booster seat it-
self.
5) This product isn't recommended for babies
who can't sit by themselves.
6) Make sure that both the fl oor and the chair
surface are fl at before using the product.
7) Once the booster seat is on the chair, verify
the stability of the product on the chair.
8) Never use this product on a stool, a folding
chair or an unstable chair.
9) Never leave your child unattended in this
product.
10) Use the safety harness at all times.
11) Use this product only on a chair and with all
the restraining system and safety harness
locked as described in the instruction leaf-
let.
INSTRUCTIONS FOR SAFE USE
Assemble the 4 feet as described in fi g. 1
OPENING THE PRODUCT
Lift completely the backrest (fi g. 2). Avoid putting
the backrest in the incorrect position (fi g. 2A).
When reaching the correct position of the back-
rest, you will hear a "click" (fi g. 2B).
To open the booster seat frame, push the 2 but-
tons "B", while pushing down the frame at the
CAM SMARTY.indd 15 CAM SMARTY.indd 15
same time (fi g. 3). Thanks to its locking mecha-
nism, the booster seat frame is adjustable in dif-
ferent heights (fi g. 3A).
ASSEMBLING THE TRAY (optional)
• Insert the 2 plastic parts "C" of the tray on the
armrests' slots (fi g. 4).
• Turn the tray towards the direction of the ar-
row and insert the buttons "T" on the hous-
ings "L", placed on the sides of both arm-
rests (fi g. 4A).
ASSEMBLING THE SAFETY HARNESS
Carefully examine picture 5 to establish the dif-
ference between each kind of harness / strap.
Crotch strap "S":
insert the crotch strap "S" through the slot on the
seat (fi g. 5A-5B).
Waist strap "M":
• Insert the 2 D rings of the waist strap "M" into
the relevant slots 1 and 2 placed on the low-
er part of the backrest (fi g. 6)
• Before inserting the D ring, turn it as to make
it pass through the slot (Fig. 6A)
• Insert the D rings one after the other into the
slots (fi g. 6B-6C).
• Avoid leaving the D ring in the incorrect posi-
tion (fi g. 6D)
• Slightly turn the D ring clockwise (fi g. 6E)
• Reach the locking position of the D ring (fi g.
6F).
Lock the waist strap "M" into the crotch strap "S"
(fi g. 7)
Backrest locking harness "P":
Make pass the backrest locking harness "P" into
both the 2 D rings of the harness "M" (already as-
sembled to the backrest) (fi g. 8-8A)
Seat unit locking harness "F":
After lowering the backrest (fi g. 15), turn the
booster seat upside down, making sure that the
4-12-2007 16:15:28 4-12-2007 16:15:28