Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
m-cube sats manual 03-11-04.qxd
15/12/2004
S T A G E 2
Mounting the
M-Cube satellite
to the floorstand
08:23
Page 7
S T E P 1
S T E P 2
Attach the stand base to
Pass the speaker cable
the pole. Connect securely
through the stand base.
by using the M3 screw
Then, attach the spikes and
provided.
locking nuts to the stand
base, using the appropriate
end of the spikes for your
flooring.
Warning: Be careful. Floorstand spikes are very sharp.
When positioning the speakers avoid piercing any
electrical cables etc. under or above the carpet.
Hard floors
S T E P 3
S T E P 4
Thread the speaker cable
Screw the stand connector
through the bung and then
into the satellite using the
slot the bung into the stand.
long M6 screw provided.
Note that the connector
between the satellite and
bracket has a locating device
that will only fit one way.
Carpet
S T E P 5
Place the satellite on the pole
and screw the stand
connector to the stand using
the 2 x M3 screws.
4 - 5
Publicidad
Tabla de contenido
