User Instructions - Mission M-CUBE Manual De Instrucciones

m-cube sub manual 03-11-04.qxd 15/12/2004
S T A G E 1
Connecting
your receiver
to the M-Cube
subwoofer
08:24 Page 7
S T E P 1
Unsheath and connect the umbilical cable bare
wires to your receiver's 5 x speaker level outputs.
Each wire is labelled to correspond with the
appropriate amplifier channel. Connect the cable
labelled 'LFE' to your receiver's LFE (subwoofer)
output socket.
Do not unsheath or connect the channel labelled
'REAR CENTRE'.*
S T E P 2
Connect the umbilical cable multi-way plug to
the subwoofer input socket labelled 'SPEAKER
INPUT'. Connect the LFE cable to the socket
labelled 'LFE IN'.
P L E A S E N O T E
IN ORDER THAT YOUR SUBWOOFER FUNCTIONS
CORRECTLY, YOU MUST CONNECT ALL RECEIVER
CHANNELS TO THE SUBWOOFER VIA THE
UMBILICAL CABLE.
*IF YOU OWN A 6-CHANNEL RECEIVER AND HAVE
PURCHASED A SIXTH SATELLITE, THE CHANNEL
LABELLED 'REAR CENTRE' ON THE UMBILICAL
CABLE WILL NEED TO BE CONNECTED TO YOUR
RECEIVER.
4 - 5