Install Software And Documentation; Log On To The Vision Sensor - Cognex In-Sight 2000 Serie Manual

Install Software and Documentation

To configure an In-Sight vision sensor, In-Sight Explorer software must be installed
on a networked PC. In-Sight software is available as a free download from the In-
Sight support site, or can be purchased separately on a DVD.

Log On to the Vision Sensor

1. Open the In-Sight Explorer software. From the Windows Start menu,
select: All Programs > Cognex > In-Sight > In-Sight Explorer x.x.x > In-Sight
Explorer x.x.x.
2. From the Get Connected Application Step, select your In-Sight vision
sensor from the Select an In-Sight Sensor or Emulator group box and press
the Connect button.
Vision Sensor Specifications
Specifications
Operating Temperature
Storage Temperature
Maximum Humidity
Protection
Shock (Shipping and
Storage)
Vibration (Shipping and
Storage)
2000-110
0°C to 40°C (32°F to 104°F)
-10°C to 60°C (-14°F to 140°F)
< 95%, non-condensing.
IP65 when all connectors are attached to cables or shielded by a sealing cap.
IEC 60068-2-27: 1000 shocks, semi-sinusoidal, 11g, 10ms
IEC 60068-2-6: vibration test in each of the three main axis for 2 hours @ 10 Gs (10 to
500 Hz at 100m/s2 /15mm)
9
2000-120 2000-130