Noise And Vibration Information - Festool ETS 125 Q Manual De Instrucciones

Eccentric sander
Technical
ETS 125 Q
data
Power
Speed 14,000 rpm
Working
28,000 rpm
strokes
Sanding
stroke
Sanding pad
Weight 1.1 kg (excluding cable)
Degree of
protection
The specifi ed illustrations can be found at the
beginning of the operating instructions.
Symbols
Warning of general danger
Wear ear protection!
Wear a dust mask.
Wear protective goggles.
Read the Operating Instructions/Notes!
1 Intended use
As specifi ed, the machines are designed for sand-
ing wood, plastic, stone, composite materials,
paint/varnish, fi ller and similar materials.
Metal and materials containing asbestos must
not be processed.
The machine is particularly suitable for process-
ing smaller surfaces and overhead work because
of its size, its weight and its output.
For reasons of electrical safety the machine must
not be damp nor operated in a humid environment.
The machine may only be used for dry sanding.
The user is liable for damage and injury
resulting from incorrect usage!
ETS 125 EQ
200 W
5,000 -
14,000 rpm
10,000 -
28,000 rpm
2.0 mm
diameter 125 mm
/ II
2 Safety instructions
2.1 General Safety Rules
WARNING! Read all safety warnings and
all instructions. Failure to follow the warn-
ings and instructions may result in electric shock,
fi re and/or serious injury.
Save all warnings and instructions for future
reference.
The term „power tool" in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
2.2 Tool-specifi c safety rules
Always wear protective goggles because
of possible dangers when sanding.
- The manufacturer's handling and processing
instructions must be observed without fail if
explosive or self-igniting dusts are likely to oc-
cur during sanding.
- Harmful/toxic dusts can occur during your work
(e.g. lead-containing paint, some types of wood
and metal). Contact with these dusts, espe-
cially inhaling them, can represent a hazard for
operating personnel or persons in the vicinity.
Comply with the safety regulations that apply in
your country. Connect the electric power tool to
a suitable extraction system.
To protect your health, wear a P2 protec-
tive mask.
- If the power tool is dropped or falls, check
for damage to the machine and sanding pad.
Remove the sanding pad for closer inspection.
Repair damaged parts before using again. Bro-
ken sanding pads and damaged machines can
cause injuries and machine instability.
- Only for AS/NZS: The tool shall always be sup-
plied via residual current device with a rated
residual current of 30 mA or less.
2.3

Noise and vibration information

The typical values determined in accordance with
EN 60745 are:
Sound-pressure level
Sound-power level
Measuring uncertainty allowance
Wear ear protection!
Overall vibration levels (vector sum for three di-
rections) measured in accordance with EN 60745:
Vibration emission level
(3 directions)
Uncertainty
9
70 dB(A)
81 dB(A)
K = 3 dB
2
a = 4,5 m/s
h
K = 2,0 m/s 2