Nebula Apollo D2410 Manual De Instrucciones página 10

[Projector Mode]
4. App Manager
① Press
to access the home menu, select [Settings] > [App
Manager], and press
② Select an app and check the current version, open or force stop the
app, check the storage used or clear data, or uninstall the app.
When more than 3 apps are installed, you can select [All] at
T
the bottom line of the home page to access the [Apps] page
or App Store on the home page. Select an app and press
on the remote control, and then you can select [Move To
Home] or [Uninstall].
17
[Front Projection]: The projector is located
in front of the projection surface.
[Rear Projection]: The projector is located
behind the projection surface.
[Inverted Front Projection]: The projector
is hanging from the ceiling in an upside
down position. The image is rotated by
180 degrees.
[Inverted Rear Projection]: The projector is
hanging from the ceiling in an upside down
position behind the projection surface.
The image is rotated by 180 degrees and
horizontally mirrored.
.
5. Others
On the home menu, select [Settings] to find more setting options.
[Language] Select an on-screen display language.
Turn on / off the keypad tone.
[Keypad Tone]
[Automatic Sleep Interval] 5 min / 15 min / 30 min
[Background] Select a background.
Clear the cached data stored on the projector.
[Clear Cache]
Activate screen mirroring.
[Screen Mirroring]
[Date & Time]
[Automatic Date & Time] Enable / disable automatic date and time.
[Date] Manually set date.
[Time]
Manually set time.
Select time zone.
[Select Time Zone]
Select 24-hour format or 12-hour format.
[Use 24-Hour Format]
Check if it is the latest version. Follow the
[Check Update]
on-screen instructions to upgrade the
firmware version.
All data on the built-in storage will be
[Recovery]
erased.
[General]
[Upgrade]
[About]
EN
18