Publicidad
Idiomas disponibles
Idiomas disponibles
Mounting (Rack)
Mount your equipment in either a 4-post or 2-post rack or rack enclosure (see below for 2-post
mounting). The user must determine the fitness of hardware and procedures before mounting. If
hardware and procedures are not suitable for your application, contact the manufacturer of your
rack or rack enclosure. The procedures described in this manual are for common rack and rack
enclosure types and may not be appropriate for all applications.
Note: The illustrations may differ from your model.
4-Post Mounting
All UPS models include hardware required to mount in a 4-post rack.
1
Attach mounting ears
mounting holes of your equipment
the screws provided
face forward.
2
Using an assistant if necessary, lift your
equipment and mount it to the rack. Attach
it by screwing the appropriate hardware
through its mounting ears and into the rack
rails.
2-Post (Telecom) Mounting
Mount 1U UPS models in 2-post racks with included hardware following the procedure below.
If you mount 2U UPS models in 2-post racks, they require the addition of a Tripp Lite 2-Post
Rackmount Installation Kit (model: 2POSTRMKITWM, sold separately). See Installation Kit owner's
manual for installation procedure for 2U UPS models.
1
Attach mounting ears
mounting holes of your equipment
the screws provided
face backward.
2
Using an assistant if necessary, lift your
equipment and mount it to the rack. Attach
it by screwing the appropriate hardware
through its mounting ears and into the rack
rails.
13-12-130-93328A.indb 4
to the front
A
using
B
. The ears should
C
D
to the front
A
using
B
. The ears should
C
D
B
A
1
D
D
2
B
A
1
D
D
2
4
C
C
1/6/2014 2:59:17 PM
Publicidad
Capítulos
