Troubleshooting Guide - Omcan IC-CN-0012 Manual De Instrucciones

Troubleshooting

TROUBLESHOOTING GUIDE

This troubleshooting guide in the user manual should be read before attempting any service. Be sure to turn to
this guide only when the trouble shooting in user manual can't help you solve the problem.
THE MACHINE DOES NOT MAKE ICE
Problem
The machine doesn't
operate
Water System
Check part or point
Plug
Socket
Power switch
Fuse
Wiring connection
Voltage
Ice full probe
Ice full probe
Wiring
Electric component
Controller
Water supply tap
Water supply pipe
Possible Cause
The icemaker is
unplugged.
Socket is damaged
The icemaker power
button is set at OFF.
The fuse is blown.
Some wiring connection
is incorrect or loose.
The voltage of the power
supply is low.
The ice full probe is not
working.
The ice full probe is
covered by something.
Some wiring is damaged. Replace with a new one.
Some electrical
component has failed.
The controller has failed.
The water supply tap is
turned off.
The water supply pipe is
not properly connected or
may be kinked.
14
Probable Correction
Plug the icemaker in.
Check and replace.
Switch the icemaker
power button to ON.
Replace fuse.
Check and re-connect.
Add manostat.
Replace with a new one.
Clear the probe and
make the ice-full probe is
free of obstructions.
Find the controller,
press the mode button
to change the mode. It
is helpful to judge which
part is out of function.
Replace with a new one.
Turn on the water supply
tap.
Reconnect the water
supply pipe.