Detection Range - Dometic MWE 7006 Manual De Instrucciones

Detection range

I
NOTE
If an error occurs during this procedure, you can restart the pro-
cedure by pressing both buttons together for longer than three
seconds.
9 Detection range
See fig. c
The detection range of the parking aid is divided into four zones:
 Zone 1
This zone is the first limit range. Small objects or those with poor reflective
characteristics may not be detected here.
 Zone 2
Nearly all objects in this zone are displayed.
 Zone 3
Virtually all objects are displayed in this zone, but some objects may end
up in the blind spot of the sensors.
 Stop zone (4)
If there are objects in this zone, the parking aid emits a continuous tone
warning you to stop.
Virtually all objects are displayed in this zone, but some objects may end
up in the blind spot of the sensors.
There must be no objects such as bicycle racks or spare wheels in the
detection range of the sensors, as this would result in an incorrect dis-
play.
The display of fixed objects, such as a trailer coupling or a part of the
spare wheel, can be suppressed (parameters 51, 52 and 53).
10
MWE7006
EN