Descargar Imprimir esta página

PALSON Ocean Modo De Empleo página 8

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 6
GB
Our products are developed to the highest standards of quality, functioning and design. We hope you enjoy your new PALSON OCEAN
humidifier.
Operation
1.
Before using the unit check that the voltage and power frequency in your home are the same as specified on the label on the
humidifier. Both must be the same.
2.
Always place the unit in a suitable location in an upright position.
3.
Remove the water tank (2) from the base, keeping the outlet hole at the top and then open the cover and pour in distilled water at
a temperature of below 40º C.
4.
Close the cover and clean up any water spilt on the surface of the tank after the filling. Finally, carefully replace the water tank onto
the base (10).
5.
Insert the nozzle (1) in the slot situated in the upper part of the water tank.
6.
Press the "I/O" button to switch on the appliance. The "on" indicator light (6) will then light up and the humidifier will start to operate.
Turn on the rotation switch. The rotation switch indicator light will light up and the humidifier will start to spray over a 360º area. The
power and rotation indicator light may indicate the following:
Power indicator light: GREEN (normal functioning) / RED (lack of water).
Rotation indicator light: GREEN (normal functioning) / OFF (Rotation deactivated)‫۔‬
7.
Adjust the main switch to select the required humidity.
8.
If you want the humidifier to only spray in one direction, switch off the rotation switch. If you want to spray over a full 360º area
simply switch on this switch.
9.
When there is no water left, the safety system will automatically switch off the spraying circuit and the unit will stop spraying. If you
want to continue to use the unit, you must switch it off and fill up the tank with water.
Precautions
1.
Do not fill the water tank with water that is over 40º C. Should you do so, the unit could malfunction or be damaged.
2.
To prevent the water freezing and the unit being damaged as a consequence, remove any water left in the tank and in the tray when
the temperature of the surroundings reaches below 0º C.
3.
Do not scrub the water tray or any other part with metal objects or with chemical products as this could affect the correct operation
of the appliance.
4.
Do not move the humidifier when the tank contains water.
5.
Do not stop the nozzle by force when it is rotating, as this could damage parts.
6.
When cleaning, avoid letting water get into the base so as to avoid possible damage to the appliance.
7.
Do not let water get into the air vent in the base. If there is water on the outside of the base, wipe it off with a dry cloth.
8.
No not place the humidifier in a draught. . Keep the appliance away from furniture or electrical equipment.
9.
Switch off the humidifier and unplug it from the power supply if you detect abnormal sounds or smells while it is operating. If it is
necessary to carry out any maintenance work, this should be done by professionals.
10. Switch the appliance off and unplug it from the power supply before adding water, cleaning or moving the humidifier.
11. Do not switch on the humidifier if there is no water in the tray.
12. Take care with the positioning of the humidifier so as to ensure it operates properly and to avoid unnecessary accidents.
Safety precautions
1.
Do not remove the plug with damp or wet hands.
2.
Do not remove the base to repair it or adjust it.
3.
Do not touch any component in the base when the unit is switched on.
4.
Any modification or repair to the humidifier carried out by the user could cause discomfort or physical harm to other users.
5.
If the power cable is damaged, it must be replaced by the manufacturer or his authorised technical service agent or by a qualified
technician, so as to avoid any danger.
6.
This product must not be used by children or by others without assistance or supervision if their physical, sensory or mental state
prevents them from using it safely. Children must be supervised to ensure they do not play with the appliance.
Ultrasound effect in the Humidifier:
Once the appliance is switched on and working, the vaporiser vibrates at a very high frequency. This enables the ultrasound to be
created, due to the mechanical energy produced. The vaporiser converts water to vapour, which is sprayed into the room and in so doing
increases the ambient humidity. The vibration frequency is 1.7 M/S.
8

Publicidad

loading

Productos relacionados para PALSON Ocean

Este manual también es adecuado para:

30540