Doro congress 205 Manual De Instrucciones página 5

Changing the clock, alarm settings, language or contrast
If you wish to alter the clock, alarm, language or contrast settings at a later point
please refer to Connection/Initial programming (steps 5-12) on page 1.
The display
In standby mode the date and time, number of new and total number of calls stored in
the Caller ID memory will be displayed.
Ringer
The ringer volume, melody and tone can be selected using the switches located on the
underside of the telephone:
Ring volume
e
Ring melody
n
Ringer tone
Labels/protective cover
The back cover is fastened by 2 pieces of plastic and secured by two screws, these
have to be removed first.
Information such as a company logo can be placed under the protective cover.
This is especially useful where the back of the telephone is facing a customer/visitor
on a reception desk.
The memory index cover can also be removed by carefully prising the right hand side
of the cover using a small flat blade screwdriver.
Making a call
Regular dialling
1. Lift the handset, dial tone will be heard.
2. Dial the required telephone number.
Pre-Dialling
You can enter and correct a telephone number before dialling.
1. Dial the required telephone number. Mistakes can be erased using
2. Press
OR press
If you wish, you can switch between handset and hands free mode by simply pressing
or lifting the handset.
s
Redial
The five most recently dialled numbers can easily be redialled using:
1. Repeatedly press
2. Press
OR press
If you wish, you can switch between handset and hands free mode by simply pressing
or lifting the handset.
s
English
to dial the number.
s
to scroll through the dialled numbers.
r
to dial the number.
s
5
.
C