Caller ID
Caller ID allows you to see who is calling before you answer a call or to see who
has called in your absence. If the number received is stored in the Phone book its
associated name will be displayed instead. The CID memory will store up to 30
names/telephone numbers stored chronologically. The sequence number is shown in
the top right-hand side of the display. When the memory is full, the oldest number
will be deleted automatically as the new call is logged. New calls are indicated in plain
text in the display.
In order for numbers to be shown you must subscribe to the Caller ID service provided by your network
operator, and a current subscription in place. Contact your operator for more information.
Retrieving and dialling incoming numbers
1. Press
repeatedly until the symbol
2. Scroll through the entries using
3. Press
to dial the displayed number, or just wait to return to standby mode.
If you wish, you can switch between handset mode and hands free mode during the
call by simply pressing
Caller ID Messages
Apart from showing telephone numbers, the display can also show:
OUT OF AREA
PRIVATE
T
Z (double envelope)
q
* Message indication can be erased manually by pressing
Deleting numbers
1. Scroll to the desired entry using
2. Press
, DELETE? is displayed, alternatively press and hold
C
ALL? is displayed.
3. Press and hold
Transferring numbers to the Phone book
1. Scroll to the desired entry using
2. Press
.
p
3. Press
again. To enter a name please refer to Changing phone numbers/
p
names on previous page.
v
.
s
It is an International call or a call from a PBX (no
information received).
The call comes from a blocked number or a PBX.
New number not previously displayed.
Several calls have been received from the same telephone
number.
The call was received while using the Call Waiting
function.
Message indication*.
v
again until the telephone number disappears.
C
v
English
is displayed.
/
.
V
C
/
.
V
/
.
V
9
.
until DELETE
C