Amann Girrbach ceramill 181400 Manual Del Usuario página 37

7 Operation during Produc-
tion
7.1 Inserting a blank
▷ Insert the blank shown on the machine screen
into the blank holder.
2.
Fig. 5 Inserting a blank
▷ Insert blank into holder to the stop and hold.
▷ Tighten screw with the provided torque screw-
driver until it "clicks".
7.2 Inserting/replacing a tool
At least two tools are mandatory for oper-
ation.
The tools are colour-coded depending on
application. They can be placed in any slot
of the tool holder. The detection of the
tool type and its wear takes place auto-
matically via RFID.
O P E R A T I O N D U R I N G P R O D U C T I O N
▷ In the start screen, press button
The screen displays:
To insert/replace a tool:
1.
▷ Select desired tool location.
The screen displays:
▷
Press Take
The blank holder moves to the insertion position
and the door opens.
▷ Insert tool into or remove from tool holder.
▷ Close door manually.
The automatic tool inventory is carried out.
The tools can be inserted via context menu
Insert tool
for empty tool positions and
and inserted or exchanged via Change tool
for occupied tool positions.
Unload
or .
E N
Tools
.
37