Car Charging; Emergency Power Supply (Eps) - EcoFlow DELTA Manual Del Usuario

3.6 Car Charging

Users can recharge the product through the Car Charging Input Port. It supports 12V/24V car
chargers and an 8A default charging current.
Please charge using the car charger after you've started the car to avoid failure to start due to
insufficient car battery. In addition, please make sure that Car Charging Input Port and the Car
Charging Cable are in good condition. EcoFlow takes no responsibilities for any losses or damages
caused by failures to follow instructions.
Car Charging Cable

3.7 Emergency Power Supply (EPS)

The product supports EPS. When you connect the grid power to the AC Input Port of the product
through an AC Charging cable, you can power electrical devices through the AC Output Sockets (AC
power will come from the grid and not the power station in this situation). In case of a sudden blackout,
the product can automatically switch to the battery powered supply mode within 30ms. As a basic
UPS function, this function does not support 0ms switching. Please do not connect the product to
any device that requires 0ms UPS, such as data servers and workstations. Please test and confirm
the compatibility before using the product. We recommend that you only charge one device at a
time and avoid using multiple ones at the same time to avoid overload protection. EcoFlow takes no
responsibilities for any device failures or data losses caused by failures to follow instructions.
AC ON/ OFF
CAR POWER
7