214
193
193
25
4
1013
4
60
25
6
min. 444
max. 447
• 4. Top right–and front panel
• 5. Top left-hand front panel
• 6. Bottom right-hand front panel
• 7. Bottom left-hand front panel
3. Fix the bracket to the door with the
screws contained in the bag.
4. Refit the bracket on the adjustment
screws and screw the nuts with
washers without tightening them
down.
214
193
193
25
5
1013
min. 3
4
60
25
7
min. 444
max. 447
mm
1
2
5. Close the door and check that the
small door is positioned at the
required height, operating the
adjustment screws if necessary.
6. Use the same screws for vertical
alignment of the small doors.
7. If necessary, carry our horizontal
alignment by shifting the small doors.
8. After aligning the doors, tighten the
nuts of the brackets and the screws
of the small bracket.
9. Fix the shorter and longer bracket
located under the door to the panel
with the two plastic washers
contained in the box of accessories.
ENGLISH
17