Scope of delivery
NOTICE!
A
Do not expose the device to a heat source (such as direct sun-
light or heating). Avoid additional heating of the device in this
way.
Electrical cables
CAUTION!
!
Lay the cables so that they cannot be tripped over or damaged.
NOTICE!
A
If cables have to be guided through metal walls or other walls
with sharp edges, use ducts or bushings to prevent damage.
Do not lay cables which are loose or bent next to electrically
conductive material (metal).
Do not pull on the cables.
Do not lay the 230 V mains cable and the 12/24 V DC cable in
the same duct.
Fasten the cables securely.
1.3
Operating the device safely
WARNING!
!
Operate the device only if you are certain that the housing and
the cables are undamaged.
Always disconnect the power supply when working on the
device.
NOTICE!
A
Make sure the ventilation grilles in the device are not covered.
Ensure good ventilation.
2
Scope of delivery
Fuse box with transformer
Installation and operating manual
6
MK140
EN