Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Translation of the original instructions
DESCRIPTION OF THE APPLIANCE
(see fig.6)
1
Dust and/or liquids container
2
Pivoting wheels
3
Hose inlet
4
ON/OFF switch
5
AUTO switch automatic simultaneous ignition
switch for power tools
6
Socket panel for connection to power tools max
2200W.
7
Clasp to open dust collection compartment
8
Lid
9
Handle
10 Air outlet grid
11 Power supply cable
12 Spline
13 Guides
(A) Single or double layer paper bag
(B) Hepa cartridge filter
(C) Filter in polyurethane foam
(only for wet & dry models)
(D) Basket with safety float
(only for wet & dry models)
(E) Outlet filter of motor cooling air
(only for wet & dry models)
(F) Air outlet filter (according different models)
ACCESSORIES PROVIDED
(according different models) * : optional
(see fig.5)
A1 hose complete with handle and connection
B1 Two extension hoses in metal chromium plated
C1 Crevice and corner tool
D1 Power tool adapter
E 1 Main brush head
L1 Floor accessory brush with bristles (dry suction)
L2 Floor accessory brush with rubber (liquid suction)
M1 Curved handle
Arm vibrations
0,10 m/s
K (uncertainty) 0,5 m/s
2 -
sound pressure level : LpA = 79 dB (A)
ASSEMBLY INSTRUCTION
(see fig.6-7)
•
Before using the appliance always check that all the
filters provided are in the correct position.
- Position the polyurethane filter (C) around basket (D)
(figure 7, position 1).
- Position cartridge filter (B) in its seat (figure 7, position
2-3).
- When using bag (A), make sure the bag's flange is
properly inserted into the appropriate grooves 13 in
the dust and/or water container (figure 7, position 4).
- Insert the bayonet cap at the end of the flexible hose
(A1) into the inlet 3 and turn clockwise until locked as
shown in fig. 2.
- Join the extension hoses together and then connect
the tubes or tube to the curved handle on the flexible
hose applying light pressure.
- To the other end attach a suitable accessory fig.5:
- To fit the inserts (L1,L2), gently push the accessory
into the main brush head (E1) until the hooks click
into the side slots on the brush head as shown in fig.
3
- All the accessories provided can be attached to the
end of the tubes of flexible (E1) or directly to the
handle (M1).
2
11
Publicidad
Tabla de contenido
