JVC LT-50VA8035 Manual De Instrucciones página 22

Picture
Picture Mode: Set the picture mode to suit your
preference or requirements. Picture mode can be
set to one of these options: User, Standard, Vivid,
Sport, Movie and Game. You can use User mode
to create customised settings.
Dolby Vision Modes: If Dolby Vision content is detected
Dolby Vision Dark and Dolby Vision Bright picture mode
options will be available instead of other picture modes.
Brightness, Contrast, Saturation, HUE, Sharp-
ness settings will be adjusted according to the
selected picture mode. If one of these settings is
changed manually, Picture Mode option will be
changed to User, if not already set as User.
Dolby Vision Notification: Set your notification
appearance preference for Dolby Vision content.
When turned on, Dolby Vision logo will be displayed
on the lower right side of the screen when Dolby
Vision content is detected.
Auto Backlight: Set your auto backlight preference.
Off, Low, Middle and Eco options will be available.
Set as Off to disable.
Backlight: Adjust the backlight level off the screen
manually. This item will not be available if the Auto
Backlight is not set as Off.
Brightness: Adjust the brightness value off the
screen.
Contrast: Adjust the contrast value off the screen.
Saturation: Adjust the saturation value off the
screen.
HUE: Adjust the hue value off the screen.
Sharpness: Adjust the sharpness value for the
objects displayed on the screen.
Gamma: Set your gamma preference. Dark, Middle
and Bright options will be available.
Color Temperature: Set your colour temperature
preference. User, Cool, Standard and Warm
options will be available. Set as User to adjust red,
green and blue gain values manually. If one of these
values is changed manually, Color Temperature
option will be changed to User, if not already set
as User.
Picture Format: Set the aspect ratio of the screen.
Select one of the predefined options according to
your preference.
HDR: Turn the HDR function on or off.
Advanced Video
DNR: Dynamic Noise Reduction (DNR) is the
process of removing noise from digital or analogue
signal. Set your DNR preference as Low, Medi-
um, Strong, Auto or turn it off by setting as Off.
MPEG NR: MPEG Noise Reduction cleans up
block noise around outlines and noise on the back-
ground. Set your MPEG NR preference as Low,
Medium, Strong or turn it off by setting as Off.
Adaptive Luma Control: Adaptive Luma control
adjusts contrast settings globally according to
content histogram in order to provide deeper black
and brighter white perception. Set your Adaptive
Luma Control preference as Low, Medium,
Strong or turn it off by setting as Off.
Local Contrast Control: Local contrast control
divides each frame to defined small regions and
provides ability to apply independent contrast set-
ting for each region. This algorithm improves fine
details and provides better contrast perception.
It makes higher depth impression by enhancing
dark and bright areas without any detail loss. Set
your Local Contrast Control preference as Low,
Medium, High or turn it off by setting as Off.
DI Film Mode: It is the function for 3:2 or 2:2
cadence detection for 24 fps film contents and
improves the side effects (like interlacing effect
or judder) which are caused by these pull down
methods. Set your DI Film Mode preference as
Auto or turn it off by setting as Off. This item
will not be available if Game Mode or PC Mode
is turned on.
Blue Stretch: Human eye perceives cooler whites
as brighter white, Blue Stretch feature changes
White balance of mid-high grey levels to cooler
colour temperature. Turn the Blue Stretch function
on or off.
Game Mode: Game mode is the mode which cuts
down some of the picture processing algorithms
to keep up with video games that have fast frame
rates. Turn the Game Mode function on or off.
PC Mode: PC Mode is the mode which cuts down
some of the picture processing algorithms to keep
signal type as it is. It can be usable especially for
RGB inputs. Turn the PC Mode function on or off.
HDMI RGB Range: This setting should be ad-
justed according to input RGB signal range on
HDMI source. It can be limited range (16-235)
or full range (0-255). Set your HDMI RGB range
preference. Auto, Full and Limit options will be
available. This item will not be available, if the
input source is not set as HDMI.
Color Tuner: Colour saturation, hue, brightness
can be adjustable for red, green, blue, cyan, ma-
genta, yellow and flesh tone (skin tone) for having
more vivid or more natural image. Set the HUE,
Saturation, Brightness, Offset and Gain values
manually. Highlight Enable and press OK to turn
this function on.
11 Point White Balance Correction: White bal-
ance feature calibrates TV's colour temperature in
detailed grey levels. By visually or measurement,
English - 20 -