Statement Of Use - Desoutter ESP2-A Manual Del Usuario

6159922220_05
Original instructions.
© Copyright 2018, Ets Georges Renault
44818 St Herblain - FR
All rights reserved. Any unauthorized use
or copying of the contents or part thereof
is prohibited. This applies in particular to
trademarks, model denominations, part numbers
and drawings. Use only authorized parts. Any
damage or malfunction caused by the use of
unauthorised parts is not covered by Warranty or
Product Liability.

STATEMENT OF USE

This product is intended to be used to
drive, monitor and control the SLBN electric
screwdrivers.
No other use permitted.
For professional use only.
TECHNICAL DATA
● See page 4.
INSTALLATION
Danger
Risk of electric shock.
This power tool must be earthed.
● Place the controller indoors in a dry
area.
● Do not expose to rain.
A WALL MOUNTING
The controller should be installed in such
a way that it can be easily switched off.
● Secure the controller by using 2 M6 screws
(not supplied in the kit).
B BOTTOM PANEL
1 Power supply connection
2 Power switch
3 Tool A connector
4 Tool B connector
5 Inputs connector
6 Ouputs connector
7 Fuse holder
● Connect tools A and B to their respective
location.
The voltage of the tool is automatically
recognized by the controller.
FRONT PANEL
C
No. Item
1 OK
1 NOK
1 OK_ALL
2 Display
3 Keypad
4 LED A on
5 LED B on Green
6 Keylock
7
RESET
8 LED on
TOP PANEL
D
Screw (1) is used to connect the earth line
when the AC supply (plug) is without third earth
pin (line).
Earthing connection
The power cable must be plugged into an outlet
properly installed and grounded in accordance
with all relevant codes and ordinances.
● Never remove the grounding prong or modify
the plug in any way.
● Do not use any adaptor plugs.
● Check with a qualified electrician if you are
in doubt as to whether the outlet is properly
grounded.
If the tools should electrically malfunction or
break down, grounding provides a low resistance
path to carry electricity away from user.
10 / 172
English
LED Description
Green The report is OK.
Red The report is NOK.
The batch is
Green
complete.
Green Tool A is enabled.
Tool B is enabled.
The power supply
Green
is on.
02/2018