Use Of This Manual; General Warning; Safety Information; Unpacking - VWR 710-0958 Manual De Instrucciones

Use of the manual
Using this manual will help you to keep your instrument efficient. This manual should be kept in a place
nearby the instrument for easy reference.

General warning

The homogeniser has been designed for laboratory use and it should not be used at temperature below 15 °C
in order to avoid sudden wearing of the crank mechanism. If the instrument is at a temperature below 10 °C
place it in a warmer room and wait at least two hours before using it. Before plugging the instrument into a
power supply, check that the voltage and frequency on the label matches the power supply specifications.
Before any operation ensure that the ventilation grids are not obstructed and the door is properly closed.

Safety Information

The device must be correctly installed according to these instructions before starting any operation.
Never disconnect the device by pulling the electric cable from the socket.
Immediately replace the electric cable when it becomes damaged or worn.
When removing this item when connected to an electrical system pay particular attention to the electronic
connection cable.
Always disconnect from an electrical system when:
A. Repairing or maintenance; these operations must be carried out by qualified staff only
B. Cleaning the unit
Use original spare parts and accessories for any replacement.
Do not use this device in the presence of explosive gases.

Unpacking

Carefully open the box and ensure that it contains:
1 HOMOGENISER
1 ELECTRICAL POWER CABLES (EU)
1 INSTRUCTION MANUAL
Any damage must be immediately reported to the carrier before signing any shipping document.
4