Ec Declaration Of Conformity - Stanley FATMAX KFFMED1250 Manual Del Usuario

Brush monitor (fig.C)
Your tool has a built in system that monitors the health of the
brushes.
Green brush monitor indicator (17). The brushes are in
u
good condition.
Red brush monitor indicator (18). The brushes are warn
u
and need replacing, return your tool to an authorised
Stanley Europe Service Centre in order to to have the
brushes replaced.
Accessories
The performance of your tool depends on the accessory used.
Stanley Fat Max accessories are engineered to high quality
standards and designed to enhance the performance of your
tool. By using these accessories you will get the very best
from your tool.
Maintenance
Your Stanley Fat Max corded/cordless appliance/tool has
been designed to operate over a long period of time with a
minimum of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
Switch off and unplug the appliance/tool.
u
Regularly clean the ventilation slots in your appliance/tool/
u
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth. Do
u
not use any abrasive or solvent-based cleaner.
Regularly open the chuck and tap it to remove any dust
u
from the interior (when fitted).
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
Safely dispose of the old plug.
u
Connect the brown lead to the live terminal in the new
u
plug.
Connect the blue lead to the neutral terminal.
u
Warning! No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 5 A.
Protecting the environment
Separate collection. Products and batteries marked
with this symbol must not be disposed of with normal
household waste.
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions.
Further information is available at www.2helpU.com
(Original instructions)
Technical data
Input voltage
Power input
No-load speed
Impact rate
Impact energy per stroke according
to EPTA-Procedure 05/2009
Weight
Max. drilling capacity
Concrete
Steel
Wood
Level of sound pressure according to EN 60745:
Sound pressure (L
pA
Sound power (L ) 104 dB(A), uncertainty (K) 3 dB(A)
WA
Vibration total values (triax vector sum) according to EN 60745:
Impact drilling into concrete (a
Chiselling (a ) 13.6 m/s
h, Cheq

EC declaration of conformity

MACHINERY DIRECTIVE
KFFMED1250 Rotary hammer drill
Stanley Europe declares that these products described under
"technical data" are in compliance with:
EN60745-1:2009+A11:2010, EN60745-2-1:2010.
These products also comply with directive
2014/30/EU, 2006/42/EC and 2011/65/EU.
For more information, please contact Black & Decker at the
following address or refer to the back of the manual.
The undersigned is responsible for compilation of the techni-
cal file and makes this declaration on behalf of
Stanley FatMax.
Stanley Europe, Egide Walschaertsstraat14-18,
ENGLISH
KFFMED1250 (Type 1)
V
AC
W
min
-1
min
-1
j
kg
mm
mm
mm
) 93 dB(A), uncertainty (K) 3 dB(A)
) 14.2 m/s , uncertainty (K) 1,5 m/s
2
h, ID
, uncertainty (K) 1,5 m/s
2 2
R. Laverick
Director of Engineering
2800 Mechelen, Belgium
20/02/2018
230
1250
0~850
0~4100
3.2
5.4
32
13
40
2
7