Cequent Performance Products 24950 Instrucciones De Instalación página 4

2009 – 2016 models:
1. Using a T25 torx bit, remove (3) screws holding the bumper fascia
to the bottom of the trunk pan.
2017 – current models:
1. Using a 10mm socket, remove (2) hex nuts holding the bumper
fascia to the bottom of the trunk pan.
3. Remove spare tire and jack tool kit – remove spare tire and using a 10mm socket remove the jack and tool kit from trunk.
©2016 Cequent™ Performance Products, Inc. -
Printed in Mexico
2. Remove underbody panel – If present (single exhaust models),
using a 10mm socket remove (3) hex nuts and (1) push-type rivet
and temporarily remove the underbody panel.
Sheet 4 of 18 24950NP 9-7-16 Rev. A