Cequent Performance Products 24950 Instrucciones De Instalación página 6

9. Seal drain holes – using silicone caulk, seal around drain holes
from inside trunk pan to prevent intrusion of water and exhaust
fumes.
11. Tighten all 4-1/2" long Gr5 carriage bolts with torque wrench
to 50 Lb.-Ft. (68 N*M)
12. Tighten all 1-3/4" long Gr5 carriage bolts with torque wrench
to 75 Lb.-Ft. (102 N*M)
Proper torque is needed to keep the hitch secure to the vehicle when towing.
©2016 Cequent™ Performance Products, Inc. -
10. Install fasteners – install (2) 1-3/4" long carriage bolts and spacer blocks
from inside the trunk pan and through holes in hitch. Loosely install the (2)
conical toothed washers and hex nuts.
Printed in Mexico
13. Reinstall hands-free trunk release cable between
hitch bracket and trunk pan.
14. Reinstall the underbody panel (if equipped).
15. Reinstall (2) screws or (2) hex nuts (depending on
model year) to reattach the fascia to the trunk pan.
16. Reinstall jack, tool kit and spare tire into trunk.
Sheet 6 of 18 24950NP 9-7-16 Rev. A