Package Contents; Description (Fi G. A); Assembly And Adjustments - DeWalt DC527 Manual Del Usuario

Charge only between 4° C and 40° C.
Discard the battery pack with due care for
the environment.
Do not incinerate the battery pack
NiMH and NiCd.
Charges NiMH and NiCd
battery packs.
See technical data for charging time.

Package Contents

The package contains:
1 Fluorescent light
1 Instruction manual
NOTE: Take the time to thoroughly read and
understand this manual prior to operation.
Description (fi g. A)
1 On/off switch
2 Base
3 Lens
4 Lens cover assembly
5 Tube
6 Rafter hook
7 Battery pack (not included)
INTENDED USE
Your DC527/DC528 fluorescent light has been
designed to provide additional lighting to aid in
professional applications.
DO NOT use under wet conditions or in presence of
flammable liquids or gases.
This fluorescent light is a professional product.
DO NOT let children come into contact with the
product. Supervision is required when inexperienced
operators use this product.

ASSEMBLY AND ADJUSTMENTS

WARNING:
• Prior to assembly and adjustment,
always remove the battery pack.
• Always turn off the fl uorescent light
before inserting or removing the battery
pack.
• Before using this fl uorescent light, make
sure the battery pack is properly seated.
WARNING: Use only DeWALT battery packs
and chargers.
Battery pack (fi g. B)
Inserting and removing the battery pack
• Insert the battery pack (7) into the fl uorescent
light until it clicks in place.
• To remove the battery pack, press the two
release buttons (8) simultaneously and pull the
pack out of the fl uorescent light.
Replacing the fl uorescent tube (fi g. C, D)
• Hold the base (2) with one hand and with the
other hand slowly rotate the lens cover assembly
(4) counterclockwise from its original position.
• Carefully lift the lens cover assembly up and from
the tube (5). Set aside the lens cover assembly.
• Carefully remove the tube from the socket (12) by
gently pulling the tube from the base.
• Ensure the socket and the area around the socket
is free of dirt, dust and other contaminants.
• Replace the tube into the socket ensuring the
contact points fi t correctly.
• Align the slots (10) at the bottom of the lens
cover assembly with the slots (11) in the base.
• Push the lens cover assembly down and rotate it
clockwise to lock the cover into place.
OPERATION
Instructions for Use
WARNING: Always observe the safety
instructions and applicable regulations.
Turning on and off (fi g. A)
• To turn the fl uorescent light on, slide the on/off
switch (1) upwards.
• To turn the fl uorescent light off, slide the on/off
switch (1) downwards.
Rafter hook (fi g. E)
The hook can be extended and locked into 8
different positions.
• Extend the hook (6) completely.
• Apply gentle force to release the hook from its
current position.
• Ensure the hook is retracted when the
fl uorescent light is carried at the grip.
WARNING: Do not hang the fluorescent
light from any electrical wires. Do not
hang the fluorescent light from anything
that is not secure.
E N G L I S H
23