Philips SBCRU460/85 Instrucciones De Manejo página 2

Instructions For Use
You just made a great choice by buying this Philips universal remote
control! It takes the place of as many as six separate remote controls
and is pre-programmed to operate the most frequently used functions
of almost any brand of TV, VCR, satellite tuner, cable decoder, CD-player
and audio receiver. If you want to operate another device or if your
device is not included in the code list, the RU460 offers you the
opportunity to copy (learn) the codes of your original remote control.
Best of all, it's quick to setup and easy to use and with the green
backlighting you can even use it in dimly lit rooms! Here's how...
AT A GLANCE
Once you've installed the batteries, this remote is ready to work with
any Philips RC5 TV, VCR, satellite tuner, CD-player, tuner and amplifier.
Simply press the mode selector as indicated below - for the Philips
device you wish to operate, and press a few keys to test. For other
brands, it needs to be set up first - see Getting Started.
Select TV, VCR, SAT/CBL, CD, AUDIO1 or AUDIO2 The remote has 6
operating modes: TV, VCR, satellite tuner (SAT/CBL), CD-player and
other equipment (AUDIO1 & AUDIO2)). The green indicator LED shows
which mode is activated. To switch between modes, press
once to activate, then press it again to advance to the next mode.
SAT/CBL CD
VCR AUDIO1
TV
MENU
P
—VOLUME—
P
1 2
4 5
7 8
0
S
2
Power switches your device off (and on,
if so on your original remote)
Mode Selector selects whether you are operating the
AUDIO2
TV, VCR, SAT/CBL, CD, AUDIO1 or AUDIO2
Menu switches menu on (and off,
if so on your original remote)
Mute switches sound on and off
Channel Up changes to next channel
Volume Up turns volume up
Channel Down changes to previous channel
Volume Down turns volume down
Keypad for direct channel selection and other functions
3
Shift: hold this key while pressing other keys to access
additional functions (if available on your equipment).
6
For instance: Shift - P+:
9
Try these and other combinations on your equipment to
discover which functions are available
1/2 Digits switches between one and two-digit
channel selection and display
for TV FastText
red
green
yellow
blue
white
Teletext Off switches Teletext off
Teletext Hold keeps the current Teletext page on screen
Backlighting switches the keypad backlighting on and off;
it will stay on for four seconds after the last key press.
Teletext Enlarge enlarges the Teletext display
Teletext On switches Teletext on
brightness+/menu up
Shift - P- : brightness-/menu down
Shift - volume +: colour+/menu right
Shift - volume -: colour-/menu left
for VCR
Rewind
Stop
Play
Forward
Pause
Record
English