Need Help - Philips SBCRU460/85 Instrucciones De Manejo

5 Once you've found the correct code, press
memory. The green LED will blink twice.
That's it! Now, switch the second TV on again manually, then press a few
keys on the remote to check that the second TV responds correctly. In
the rare instance that it doesn't, try again from step 1 to find a better
code.
Tip: Make a note of the code inside the battery case, and in the back of
this booklet in case you ever need to setup again.
To control the second TV's volume
If you have installed a second TV under AUDIO2 mode, you can also
control that TV's volume when you are in VCR mode.
Before you start, press
1 Press and hold
lights up (about 3 seconds).
2 On the keypad, press
3 Press
Audio 2 mode with the second LED.
4 Press any key (except
Now, when you're in VCR mode, press volume+ and volume- to control the
volume of the second (AUDIO2) TV.

NEED HELP?

If you have questions about your remote or if you are missing certain func-
tions on your remote, call our free-phone helpline! Before you call, please
read the manual carefully. Most questions will be answered here. However,
if you don't find an answer to your questions, make a note of your equip-
ment in the table below - this makes it easier for the operators to help you
quickly. Look for model numbers in the equipment instruction manual, or
on the back of the equipment. Be in front of the equipment, this way our
operators can help you to see if your remote is working properly.
In the UK. call 0800 968 118. In Ireland, call 1 800 553 136.
The model number of your Philips universal remote control is:
SBC RU460
Equipment
Brand
TV
VCR
SAT
CD
AUDIO 1
AUDIO 2
As you add new components to your home entertainment system, Philips again
offers a universal remote control that will fit your new needs. Look below for the
unique full range of universal remote controls from Philips at a retailer near you.
RU 110 : Universal easy TV zapper
RU 410 : 1 in 1 Universal TV Remote with digits and TXT
RU 422 : 2 in 1 Universal Remote Control for TV and VCR
RU 430 : 3 in 1 Universal Remote Control for TV, VCR and SAT/Cable
RU 440 : 4 in 1 Universal Remote Control for TV, VCR, SAT/Cable and Audio
RU 455 : 4 in 1 Universal Remote Control for TV, VCR, SAT/Cable and AUX for a
second device, with convenient backlighting
Another very attractive product from Philips is the Philips SBC LI510 Remote
Control Extender Set, the wireless extension of your infra-red (IR) remote control!
This system allows you to operate every IR driven equipment (i.e. Sat-receivers,
VCRs or Hi-Fi-sets) from anywhere in or around the house.
to select VCR.
1 6
1 and 6 at the same time until the green LED
3
3 .
repeatedly until the second LED appears. Select the
). That's it!
Model nr.
to lock the code in the
Date of purchase:
____/____/____
Day/month/year
Model number of
original remote Code
7