Sears Kenmore Elite 116.31150 Manual De Uso página 15

Ocultar thumbs Ver también para Kenmore Elite 116.31150:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

VACUUM
CLEANER STORAGE
Replace hose and wand in storage position
if necessary (see Page 6 & 7).
Gather the cord and wrap it loosely around
the upper and lower cord hooks. Lock
power cord plug onto the power cord,
Store the vacuum
cleaner
in a dry, indoor
area, on the floor
with the handle
locked in
the upright
position.
WARN I NG
Electrical Shock And Personal Injury
Hazard
Wrapping the cord too tightly
puts stress on
the cord
and can cause cord damage.
A
damaged
cord is an electrical
shock hazard
and could cause personal injury or damage.
TO CLEAN DIRT SENSOR OPTICS
The dirt sensor optics consist
of two optic
cells located
inside the clean out port.
Occasionally,
it may become
necessary
to clean the two optic cells to ensure
maximum
performance.
Out
Port
Sensor
It is recommended
the optic cells be
cleaned:
, When
the light stays on continuously.
, When
dirt or dust adheres
to the
optic cells.
, Whenever
the dust bag is removed.
To clean
the sensor, wipe the optic cells
with a soft, dry cloth.
Never use cleaners
or liquids
as they can help speed the
recoating
of the optic cells and make
it
necessary
to clean them
much sooner
than normal.
Reinstall cover.
Make sure it is completely
secured in place.
= 15 =

Publicidad

Tabla de contenido
loading

Tabla de contenido