Zonair3D AIR+50 Manual De Usuario página 23

INSTRUCTIONS FOR OPENING AND REMOVING THE FILTERS
IMPORTANT:
·
Before removing any panel, make sure that the unit is not connected to the
mains.
·
It is recommended to wear gloves when changing the filters.
·
Always pick the filters up by the frame. Never touch the filtering surface, in
order to avoid damaging it.
1- Take the unit down from the wall, lifting
it slightly to remove the hooks of the wall
mounting bracket from the unit.
3- To access the prefilter, remove the
air inlet panel by unscrewing the 6
corresponding bolts.
5 - To access the absolute filter, remove
the air outlet panel by unscrewing the 6
corresponding bolts. This panel presses
on the perimeter of the filter to ensure
the required seal.
GRSYSTEM
PREFILTER
2 - Set it down horizontally on a stable
surface and locate the filters before doing
anything.
4 - To access the GRSYSTEM, the prefilter must
be removed first.
ABSOLUTE FILTER
Motor
Air+ 50 23