Publicidad
Idiomas disponibles
Idiomas disponibles
FILTER
NOTE: Filter maintenance requirements will
change with changing water conditions.
Inspect the filter frequently and change as needed. A
dirty filter will restrict water flow to the pump and can
cause permanent damage.
SYSTEM DRAIN/STORAGE
Before storing the fan, empty the water tank and drain
all water from the system to prevent calcification and
algae forming on the components.
Regularly clean the mister and water tank with an anti-
bacterial solution.
CAUTION! Electrical shock hazard. Pinch hazard.
Trip hazard.
• Serious injury or death may occur.
• Only plug the fan into properly grounded outlets.
• Disconnect the power cord from the electric supply
before filling, servicing, or moving the fan.
• Test the GFCI safety plug before using.
• Do not carry the fan by the motor, electric cords,
hose line, fan guard or support bars.
• Do not touch the fan motor during use or directly
after. It may be hot.
• Do not operate the fan without guards in place.
• Do not insert anything into the fan guard while
operating.
PAGE 2 OF 6
MAINTENANCE
NOZZLES
Check nozzle function regulary. The spray pattern from
the nozzle should have an even cone shape. Clean or
replace the nozzle as needed.
To clean the nozzle:
1.
Remove the nozzle from the misting hub.
2. Soak the nozzle in a scale or lime removing solution.
3. If, after cleaning the nozzle fails to work properly,
replace with the spare nozzle provided.
CAUTION! Tighten the nozzle by hand only.
SAFETY
• If the fan tips over, unplug the power cord and dry
any wet areas before setting up the fan.
• Position all electric cords to lie flat on the ground or floor.
• Never use during rain, sleet, hail, snow or any other
inclement weather conditions.
• Never operate pump without water supply.
• Check for leaks. If leaks are found, turn pump off and
hand tighten leaky fittings.
• Excessively hard water with high-solids can plug nozzles.
• A plugged filter caused by poor-quality water can
restrict flow to the pump, causing permanent damage.
• Never allow condensation from the nozzles to come
into contact with surfaces. Redirect the fan to prevent
condensation from forming on nearby surfaces.
1-800-295-5510
uline.com
0421 IH-3421
Publicidad
