Kärcher NT 611 Eco K Manual De Instrucciones página 11

Please read and comply with these origi-
nal instructions prior to the initial opera-
tion of your appliance and store them for
later use or subsequent owners.
– Before first start-up it is definitely necessary to read
the safety indications Nr. 5.956-249.0!
– The non-compliance of the operating and safety in-
structions may lead to damages of the appliance
and to dangers for the operator and other persons.
– In case of transport damage inform vendor immedi-
ately.
– When unpacking the product, make sure that no
accessories are missing and that none of the pack-
age contents have been damaged.
Contents
Environmental protection
Proper use
Device elements
Start up
Operation
Transport
Storage
Care and maintenance
Troubleshooting
Warranty
Accessories and Spare Parts
EU Declaration of Conformity
Technical specifications
Environmental protection
The packaging material can be recycled.
Please do not throw the packaging mate-
rial into household waste; please send it
for recycling.
Old appliances contain valuable materi-
als that can be recycled; these should be
sent for recycling. Batteries, oil, and sim-
ilar substances must not enter the envi-
ronment. Please dispose of your old ap-
pliances using appropriate collection sys-
tems.
Electrical and electronic devices often contain compo-
nents which could potentially pose a danger to human
health and the environment if handled or disposed of in-
correctly. However, these components are necessary
for the proper operation of the device. Devices marked
with this symbol must not be disposed of with regular
household rubbish.
Notes about the ingredients (REACH)
You will find current information about the ingredients
at:
www.kaercher.com/REACH
Proper use
WARNING
The appliance is not suitable for vacuuming dust which
endangers health.
– This vacuum cleaner is intended for the continuous
disposal of large volumes of liquid (flood damage,
vacuuming containers, basins or tanks, etc.), as
well as for the wet and dry cleaning of floor or wall
surfaces.
–
1
2
3
4
5
6
7
8
9
10 Floor nozzle
11 Suction tube
12 Suction support
13 Suction head
EN 1
14 Disposal pump
EN 1
15 Acorn nut of the disposal pump
EN 1
16 Float switch of the disposal pump
EN 1
17 Carrying handle
EN 2
18 Filter cover
EN 3
19 Handle for filter cleaning
EN 3 20 Push handle
21 Bender
EN 3
22 Mains plug of the disposal pump
EN 3
23 Switch "Disposal pump OFF"
EN 3
24 Socket
EN 3
25 Switch "Disposal pump ON"
EN 4
26 Main switch
EN 4
27 Exhaust filter
28 Coarse dirt filter/flat fold filter
29 Drain hose
30 Floor nozzle holder
31 Cap
32 Holder for suction pipes
33 Cable hook
34 Holder for crevice nozzle
35 Nameplate
–
The appliance allows 3 operating modes:
1
2
3
Note: You can wet vacuum if the disposal pump is
turned off or has been removed. Removal of disposal
pump, see dry vacuuming.
Inserting the rubber lips
Illustration
 Remove the brush strips.
 Install the rubber lips.
Note: The structured side of the rubber lips must point
outwards.
– 1
EN
This appliance is suited for the commercial use,
e.g. for handymen and commercial businesses.
Device elements
Float
Power cord
Suction hose
Suction head lock
Dirt receptacle
Cable holder of the disposal pump
Lock plate
Steering roller bow
Steering roller
Start up
It is recommended that you connect this device to
a socket that has a 30 mA protection switch against
wrong currents.
Wet vacuuming with disposal pump
Wet vacuuming without disposal pump
Dry vacuum cleaning
Wet vacuum cleaning
11