12. As soon as the command
emPtY driP traY and grounds cont.
appears on the display, repeat steps 5 and 6.
The cleaning programme is complete as soon as the "Beverage
Â
selection" view is displayed again.
8.2.3 Descaling
Depending on the water hardness of the drinking water used and the appli-
cation of a water filter, the appliance must be descaled at particular intervals
so that no scale builds up in the system.
CAUTION!
Due to unsuitable descaler and if the descaling
is not performed regularly, the device can be
damaged.
– Use SEVERIN descaler, never vinegar or other
acidic substances.
– Descale regularly.
NOTE!
– The descaling process can take as long as
45 minutes.
– No warranty is made for damage that is due to
devices which have not been descaled regularly.
– If you descale immediately after the display
of a cleaning message, steps 1 and 2 can be
omitted.
– If you use a water filter, remove it before
descaling.
Version 2 2014-11
1. Press the menu button and use the arrow keys to select the menu
option
cleaning
2. Then select the
descaling
menu option
The display shows:
Â
emPtY driP traY and grounds cont.
3. Remove the drip tray and empty it together with the grounds container.
4. Re-assemble all parts and push the drip tray back into the appliance.
5. Press OK to continue.
The display shows:
Â
Please add descaling solution
6. Fill the water tank halfway with lukewarm tap water and place the desca-
ling tablets in the water tank.
7. Wait until the descaling tablets are completely dissolved, and then place
the water tank on the appliance.
8. Press OK to continue.
The display shows:
Â
descaling
9. As soon as the command
emPtY driP traY and grounds cont.
appears on the display, empty the drip tray and grounds container
again. Clean the parts with clear tap water and reinsert them into the
appliance.
10. Press OK to continue.
The display shows:
Â
rinse container and fill with water
GB
47