About These Instructions; Intended Use; Safety Notes; Device Overview - Mohlenhoff Alpha direct Basisstation Control Manual Del Usuario

ENG
1

About these instructions

These instructions apply to the timer of the Alpha direct Base Station Control. These
instructions must the read completely and thoroughly before commencing any work
with the timer. These instructions must be kept and to be handed over to future
users.
You can view and download these instructions and more instructions under www.
ezr-home.de.
The following symbols show
¾ an instruction to an action
9 a result from an action
a warning with respect to electrical voltage
an important information.
2 Safety

2.1 Intended use

The timer serves
• for single room control, in combination with the Alpha direct Base Station Con-
trol.
• for the operation in closed and dry rooms.
Every other use, modification and conversion is expressively forbidden and leads to
dangers the manufacturer cannot be held liable for.

2.2 Safety notes

All safety notes in these instructions must be observed in order to avoid accidents
with personal damage or property damage.
WARNING
Danger to life due to the electrical voltage at the base station!
• Always disconnect from the mains network and secure against unintended acti-
vation before opening.
• Only an authorised electrician may open the device.
• Disconnect external voltages and secure against activation.
• Only use the product if it is in flawless state.
• Do not operate the device without device cover.
• This unit is not intended to be used by persons (including children) with restricted
physical, sensory or mental skills or who lack experience or knowledge. If neces-
sary, these persons must be supervised by a person responsible for their safety or
receive instructions from this person on how to use this unit.
• Ensure that children do not play with this device. Children must be monitored if
necessary.
• In case of emergency, disconnect the complete room-by-room temperature con-
trol system.
2.3 Personnel-related preconditions
The electrical installations must be performed according to the current national VDE
regulations as well as according to the regulations of your local electric power utility
company. These instructions require special knowledge corresponding to an officially
acknowledged degree in one of the following professions:
• Systems Mechanic for sanitary, heating and air condition technology
• Electrical Equipment Installer or
• Electronics Engineer
according to the profession designations officially announced in the Federal Republic
of Germany, as well as according to comparable professions within the European
Community Law.
B 40602
B 20602
3 Conformity
This product is labelled with the CE Marking and thus is in compliance with the requi-
rements from the guidelines:
• 2004/108/EG with amendments "Council Directive on the approximation of the
laws of the Member States relating to Electromagnetic Compatibility"
• 2006/95/EG with amendments "Council for Coordination of the Regulations of
EU Member Countries regarding the electrical equipment for use within certain
voltage limits"
• 2011/65/EU "Restriction of the Use of Certain Hazardous Substances in Electrical
and Electronic Equipment"
Increased protection requirements may exist for the overall installation, the compli-
ance of which is the responsibility of the installer.
4

Device overview

4.1 Display
1
2
C1
3
4
1 2 3 4 5 6 7
5
0 6
ESC
6
1 Programmes switching times
2 Date indication
3 Channel status
C1, C2
ON
OFF
4.1 Buttons
MENU
7
7 MENU
- Open menu
- Cancel menu
- ESC (close menu)
8 Indication of selections
(Change/Toggle)
9 OK
- Save selection
5 Operation
Operation is possible with the 4 keys of the timer. The operating principle is as fol-
lows:
1. Read text line.
Blinking text/symbol means a question.
2. Make decision:
Yes (confirmation): Press "OK".
No (change/toggle): Press arrow keys.
C2
AM
PM
sklx
+
12 18 24
OK
4 Time indication
5 Week days from 1 - 7
6 Indication of active buttons with
the respective function
8
OK
10
- Confirm selection
10 Manual/ and continuous operation
- Activate manual operation
- Activate continuous operation
- Cancel manual/continuous
operation
ENG
24 V
230 V
9
3