Putting Into Service / Operation - Heylo HL 800 Manual De Instrucciones

The devices are typically used in the following areas:
Private apartments, offices, conference and training rooms, schools and
fitness centres. In all areas where people are present, the devices can significantly improve air quality. In
areas where pathogens such as bacteria and viruses may be present, the risk of infection can be reduced.

5. Putting into service / operation

To switch the unit on/off, press the power . to start the unit.
You start in automatic mode.
In this operating mode, the motor speed is controlled by a sensor.
The speed of the fan motor is automatically regulated in three stages, depending on
the air quality. The more particles in the air, the higher the fan motor speed.
To switch off, press the button again and the unit goes into standby mode.
Press the "Speed" button to change the fan speed. You can select 3 air output levels
by repeated tapping.
With the Mode button you can select 3 programmes
In automatic mode, the unit automatically selects the appropriate fan
speed depending on the air quality. At night, the unit automatically
reduces the fan speed. The ionisation function is in operation.
The turbo programme is useful in case of heavy air pollution, e.g.
cigarette smoke. The unit then runs at the highest fan speed.
Press the "Sleep" button to operate the machine manually at the
quietest level. This ends the automatic mode. All lights and displays
are switched off and the fan runs at the lowest speed. It no longer
responds to the air sensor
public
Air quality
17
authorities, surgeries and
EN