Night Mode; Filter Change (Filter Installation) - Heylo HL 800 Manual De Instrucciones

Display:
Light sensor
Filter display
Timer
Fan stage
Air quality display

6. Filter change (filter installation)

The main filter change is displayed by the device.
The pre-filters should be cleaned regularly at least once a month.
The filter display flashes every 3000 hours (approx. twice a year).
After changing the HEPA filter, reset the display by pressing the "Filter" button for 5 seconds.

Night mode

Remove the front cover on both sides.
Remove the pre-filters.
Push down the two clips of the pre-filter to
remove the pre-filter.
19
WIFI
EN