Packing List; Diagram - Segway Ninebot KickScooter Manual Del Usuario

2 Packing List

Handle
User Materials
USER MANUAL QUICK START LIMITED WARRANTY
Second Battery Pack
E22E
Sold separately
Accessories
M5 Flathead Screw x 7 3mm Hex Wrench
(one extra)
When unboxing your KickScooter, please verify that the above items are included in the package. If you are missing any components,
please contact your dealer/distributor or nearest service center (see contacts in the user manual). After verifying that all components are
present and in good condition, you can assemble your new KickScooter.
Please retain the box and packaging materials in case you need to ship your KickScooter in the future.
Remember to power off your KickScooter and unplug the charge cable before assembling, mounting accessories, or cleaning the
mainframe.
04
Mainframe
Battery Charger

3 Diagram

Headlight
Stem (battery cabin)
Second battery port
Reflector
Hub motor
Reflector
Bell
Dashboard & Power Button
Speedometer: Indicates the current speed. Also displays error codes when faults are detected.
Power level: Indicates the remaining battery level with 5 bars. Each bar equates to approximately 20% power level.
Power mode (double click the power button to switch the mode):
—Red "S" icon: Sport mode (maximum power/speed and reduced range).
—White "S" icon: Standard mode (moderate power/speed and range).
—No "S" icon: Speed limit mode (minimum power/speed and increased range).
Bluetooth: A blinking Bluetooth icon indicates that the vehicle is ready to connect. A solid Bluetooth icon indicates that the vehicle is
connected to a mobile device.
Power button: Short press to power on. Long press to power off. When powered on, single click to turn on/off the headlight. Double-click to
change power mode.
Electronic throttle
Dashboard & Power button
Electronic brake
Speedometer
Error display
Folding latch
Bluetooth
Charge port
Folding pedal
Rear fender/foot brake
Kickstand
Overheat tip
Power mode
Power level
Power button
(multi-functional)
05